Starting the Control
To start the control click on the “Assets” button in the upper left corner of the PI Vision display.
In the upper part select “weruLight” by clicking on it.
Afterwards the desired attribute from the asset tree could be added to the display via drag and drop. The Gauge control appears on the display and can be used.
Configuration
In the configuration, a default color can be specified in the upper area.
In addition, "High Limit" and "Low Limit" values can be stored. If these are exceeded or fallen short of, the color of the control changes to the one specified there.
If the option "Use Extreme Limits" is activated, two additional limits can be set.
Instead of a scalar value, it is also possible to specify a PI tag (\\piserver\tag). In this case, the "Is PI Tag" option must be activated.
Change the Size of the Control
In case that the legend or some part of the control is not visible, it is necessary to adjust the size of the control. To do so, the first step is to change into edit mode (Icon in the upper right corner) and in a second step to click on the control. The eight appearing dots around the control can be used to adjust the size that everything is visible.
Removing the Control
Before removing the control it is necessary to switch into edit mode (Icon in the upper right corner). Thereafter it is possible to click on the control and press the delete key to remove the control.